”Smartselect Pump Finder”, developed with an intuitive operating concept and a user-friendly interface according to user demands, serves as a central part of the sales process for selecting and configuring centrifugal pumps. Due to the smart database system of Smartselect, which is designed to meet the requirements of modern information technologies, enabling the visualisation and utilisation of all product-specific data throughout the sales process. The selection outputs and the prepared offer can be sent directly via email, which saves time.
The Smartselect programme is accessible here.INM Duo
products.detail.productType
Inline Twin Type Circulation Pump
sectors.title
Twin Head Mounted In-Line Pumps
• INM - D series twin head mounted, in - line type centrifugal
pumps.
• Formed by joining two standard INM series pumps with
collector parts.
• Special design composed of a common collector and
integrated check valves at each pump exit that provides for
independent operation.
• In case of failure of the pump the second pump goes into
operation, so the process does not come to a halt.
• Single suction, closed type impeller is equipped with rear
rings to balance thrust and is dynamically balanced.
• Maintenance - repair processes are very easy due to the back
pull out design.
• Standard asynchronous motors are used to set pump in
motion.
• The pump shaft is coupled with the motor shaft by means of
a special clamp. This coupling makes it easy to dismantle the
pump without removing the motor.
- D series twin head mounted, in
- line type centrifugal pumps.
- Formed by joining two standard INM series pumps with collector parts.
- Special design composed of a common collector and integrated check valves at each pump exit that provides for independent operation.
- In case of failure of the pump the second pump goes into operation, so the process does not come to a halt.
- Single suction, closed type impeller is equipped with rear rings to balance thrust and is dynamically balanced.
- repair processes are very easy due to the back pull out design.
- Standard asynchronous motors are used to set pump in motion.
- The pump shaft is coupled with the motor shaft by means of a special clamp. This coupling makes it easy to dismantle the pump without removing the motor.
Flow Range2x(2 – 320) m³/h
Pressure Range2 – 100 m
Speed Range1000 – 3600 rpm
Suction Flange DiameterDN 40 – DN 125
Discharge Flange DiameterDN 40 – DN 125
Pump Selection Program
