Maritime

We manufacture the most robust and reliable pumps in the sector for ports, marinas, shipyards, vessels, and other platforms with norm centrifugal pumps, in-line pumps, vertical shaft multistage and double-suction pumps, automated suction systems, and curtain passage systems made of stainless steel, duplex steel, and bronze materials for the maritime sector.

Discover how Masdaf contributes to the Maritime sector with specialized pumps designed for marine applications.

Products for Maritime

<ul>
<li>Automatic suction system with ejector working with compressed air</li>
<li>Structure designed for installations that require suction on the first move</li>
<li>Guaranteed and safe suction ability</li>
<li>A vacuum ejector that is activated if the suction is interrupted for any reason and provides suction again</li>
<li>Physically and chemically resistant to many fluids, including seawater</li>
</ul>

ASPVSP 

<ul><li>Two grease-lubricated ball bearings</li><li>Excellent sealing by mechanical packing</li><li>Low NPSH</li><li>High efficiency</li><li>Electric motor under IEC, DIN, VDE and TSE standards</li><li>Option to be used with frequency controllers</li><li>Operational, safety and ease of maintenance</li></ul>

<ul><li>System with a single or dual battery</li><li>Measuring and displaying the values on the screen</li><li>Measuring battery voltage and displaying the values on the screen</li><li>Measuring the fuel pressure with the fuel gauge and displaying the values on the screen</li><li>Aural and visual alerts in the event of a fuel runout</li><li>Ability to limit the number of starters</li><li>Measuring diesel speed rpm and displaying the values on the screen</li><li>Ability to run automatic testing twice a week (real-time clock)</li><li>Ability to set the activation and deactivation times for automatic testing</li><li>Discharge solenoid output for automatic testing</li><li>Exchanger (cooling) outlet</li><li>Pressure switch selection between normally closed and normally open</li><li>Ability to set the starter time</li><li>The diesel stop delay (10 minutes -240 minutes) can be adjusted</li><li>Reporting all faults and operating conditions by relay contact</li></ul>

Diesel Engine Fire Pump Controller

<ul><li>The "gear-in-gear" principle</li><li>Application of liquid with a low viscosity, up to fuel oil and No. 6</li><li>Inner gear type</li><li>Additional sealing measures</li><li>High efficiency, operational safety</li><li>Ease of maintenance</li></ul>

<ul><li>Ability to run automatic testing twice a week (real-time clock)</li><li>Warning: Suction and discharge valves are closed</li><li>Ability to run with remote startup</li><li>Ability to view all error states on the LCD</li><li>Storage of the last 20 occurrences with their associated date and time</li><li>Ability to view the operating time of the pump</li><li>Ability to set the pump stop delay (10 seconds-240 hours)</li></ul>

Electric Fire Pump Controller

<ul><li>Open/Closed, vortex, and shredder-blade impeller design</li><li>Anti-leakage helical stuffing box</li><li>Leak prevention with water leakage electrode</li><li>Thermistor against overheating</li><li>Use of special H07RN-F cable in accordance with TS EN 50525-2-21 standard, with core colours confirming to HD 308, EI4 Type (EPR) cable</li></ul>

Enduro

<ul><li>Surface type, wastewater, drainage pump</li><li>Specific impeller applications</li><li>Different material options</li><li>Back – pull out feature</li><li>Vertical and horizontal mounting options</li><li>ATEX certification</li></ul>

EnduroPro

<ul><li>Symmetrical scroll structure</li><li>Different option for rotation direction</li><li>Double-pitched impeller</li><li>Rigid shaft that can operate at different loads</li><li>Water-lubricated slide bearings</li><li>Compact structure</li><li>Different ball bearing options</li><li>Easy maintenance</li></ul>

<ul><li>Replaceable EPDM membrane that emits no odour and forms no bacteria in the water</li><li>as required by German hygiene standards</li><li>Conforming to TSE and CE directives</li><li>Long life and easy maintenance with a replaceable membrane</li><li>Pressure-resistant and corrosion-resistant body</li><li>Ease of installation and operation with compact design</li><li>Safe system operation with pressure equalisation and shock prevention</li></ul>

Expansion Tank

<ul><li>Co-ageing</li><li>Cavitation protection</li><li>Pipe filling</li><li>Effective system protection against water shock</li><li>Ability to operate different application areas such as cooling, heating, booster and circulation with a single programme</li><li>Water flow control test</li><li>Sleep feature</li><li>Operation feature with different set values in 4 different time periods during the day</li><li>Selection of system with and without driver</li><li>User-friendly Modbus communication feature</li></ul>

Frequency Pump Controller

<ul><li>Password protection against unauthorised access</li><li>Turkish menu, easy to use</li><li>Ability to monitor the last 20 occurrences with their associated date and time</li><li>Protection against overcurrents</li><li>Automatic reset in case of malfunction, (ability to set the waiting time and number)</li><li>Option to operate with a floater or an electrode, depending on the water level</li><li>Simultaneous ageing in multi-pump systems based on operating time</li><li>Thermistor PTC (over-winding temperature) protection</li><li>Ability to limit the number of activations (Switch) of the pumps in 1 hour</li><li>Selection between automatic and manual operation</li></ul>

General Pump Controller

<ul><li>Compact and portable design due to direct mounting on the motor</li><li>Easy to programme</li><li>Compatible with asynchronous motor and PMSM motor</li><li>Ability to operate 6 pumps together with the multi-pump system option</li><li>Communication with external units (such as building automation system or PLC) via RS-485 cable with Mod-Bus communication protocol</li><li>Output voltage drops automatically at light load to save energy</li><li>Ability to change the motor rotation direction via the programme</li><li>Water leak detection, high and low pressure warning control</li></ul>

GenIO

<ul><li>Vertical, multistage, high-pressure centrifugal pump</li><li>Pump and motor connection provided via adapter and coupling</li><li>Pump inlets and outlets that are on the same axis</li><li>Protection against dry running, out-of-phase operation and overload by equipping with a smart control panel</li><li>In addition to full production in AISI 304 or AISI 316L stainless steel, there is a GG25 material option for cast parts</li></ul>

Hexa

Twin Head Mounted In-Line Pumps
&nbsp;
• INM - D series twin head mounted, in - line type centrifugal pumps. • Formed by joining two standard INM series pumps with collector parts. • Special design composed of a common collector and integrated check valves at each pump exit that provides for independent operation. • In case of failure of the pump the second pump goes into operation, so the process does not come to a halt. • Single suction, closed type impeller is equipped with rear rings to balance thrust and is dynamically balanced. • Maintenance - repair processes are very easy due to the back pull out design. • Standard asynchronous motors are used to set pump in motion. • The pump shaft is coupled with the motor shaft by means of a special clamp. This coupling makes it easy to dismantle the pump without removing the motor.
&nbsp;
&nbsp;

INM Duo

<ul><li>Easy mounting of the frequency inverter on the motor</li><li>Besides the compact structure of the inverter integrated into the system, its usage in smart applications</li><li>Single drive - two pump control function</li><li>Protected against dry operation</li><li>Easy maintenance through the pump construction structure</li></ul>

INM GenIO

<ul><li>Flanges that conform to DIN 2535‘</li><li>Balancing with wear rings and balancing holes</li><li>Design suitable for different assembly alternatives</li><li>Different option for rotation direction</li><li>Flexible coupling connection</li></ul>

<ul><li>Flanges that conform to DIN 2535‘</li><li>Balancing with wear rings and balancing holes</li><li>Design suitable for different assembly alternatives</li><li>Advantage of use in narrow spaces</li></ul>

KMEV

<ul><li>Flanges that conform to DIN 2535‘</li><li>Ball bearing use</li><li>Wear ring option</li><li>Flexible coupling use</li><li>Design suitable for different assembly alternatives</li><li>Different option for rotation direction</li><li>Advantage of use in narrow spaces</li></ul>

<ul><li>Parallel verification provided between the sump, suction cover and bearing due to the body and bearing stabiliser</li><li>Impeller structure, balanced to ISO G 6.3 standards</li><li>Ability to pass solid particles through easily due to the optional impeller and volute body design</li><li>Maximum hydraulic performance</li><li>Ball bearings in the pump inlet area for radial loads</li><li>Excellent sealing provided by mechanical packing</li></ul>

<ul><li>Compact design</li><li>Specific impeller structure that provides self-priming</li><li>Easy assembly and disassembly</li><li>Lock lever that requires no further installation</li></ul>

MiniUKM

<ul><li>Practical and simple installation in locations where mobility and a quick fire extinguishing solution are required</li><li>Stable and efficient operation for a long time</li><li>Customised design for different conditions and needs</li></ul>

Mobile Fire System

<ul><li>Dynamic impeller balanced to ISO 21940-11 standards</li><li>Conforming to DIN 24255 and EN 733 standards</li><li>Flange that conforms to EN 1092–2 and DIN 2533 standards</li><li>Regulation in conformity with the European Directive on Ecodesign</li><li>Flexible coupling on the pump motor connection mounted on the chassis</li><li>Easy maintenance through the pump construction structure</li><li>Rapid spare parts due to common part design</li></ul>

<ul><li>Designed with a bottom foot as standard and a foot on the centre axis as an option</li><li>Version with heating jacket on request</li><li>Compliance with ISO EN 2858 DIN 24256 standard</li><li>ATEX certification</li><li>Easy installation and maintenance due to its user-friendly design</li></ul>

<ul><li>Dynamic impeller balanced to ISO 21940-11 standards</li><li>Conforming to DIN 24255 and EN 733 standards</li><li>Flange that conforms to EN 1092–2 and DIN 2533 standards</li><li>Regulation in conformity with the European Directive on Ecodesign</li><li>Plug-in motor shaft or flexible coupling in the pump motor connection</li><li>Modular design that allows for simple assembly without the use of a pedestal</li><li>Easy maintenance through the back pull-out design</li><li>Rapid spare parts due to common part design</li></ul>

<ul><li>Plug-in motor shaft in the pump motor connection</li><li>Modular design that allows for simple assembly without the use of a pedestal</li><li>Reduced misalignment errors due to the top-centred push-in nozzle and underbody support legs</li><li>Easy maintenance through the back pull-out design</li><li>Light and compact structure</li><li>Low sound level</li></ul>

<ul><li>Flanges that conform to DIN 2535‘</li><li>Ball bearing use</li><li>Wear ring option</li><li>Flexible coupling use</li><li>Design suitable for different assembly alternatives</li><li>Different option for rotation direction</li><li>Ease of maintenance</li></ul>

OMKV

<ul><li>Having a special bedding system</li><li>Having fluid end in the fluid</li><li>Filter structure</li><li>Special coupling</li><li>Electric motor use under IEC, DIN, VDE and TSE standards</li><li>Maintenance-free modular design</li></ul>

PS-PSH

<ul><li>Having an open or vortex impeller</li><li>Impeller structure, balanced to ISO G 6.3 standards</li><li>Filter structure that prevents the access of particulates</li><li>Maximum hydraulic performance</li><li>Gear connection that allows the movement of the pumping pipe</li><li>Body and bearing stabiliser</li><li>Additional sealing protection</li></ul>

<ul><li>Flanges that conform to DIN 2535‘</li><li>Inlet and outlet flanges are on the same axis</li><li>Versatile body design</li><li>Different motor drive options</li><li>Low NPSH and high efficiency</li><li>Long-life bearing</li><li>Easy maintenance</li></ul>

SPLT

<ul><li>Lock lever that requires no further installation</li><li>Diesel engines and electric motor options</li><li>Particulate permeability up to 76 mm (3”)</li><li>Ease of maintenance through the suction cover</li><li>Possibility of maintenance without disconnecting from the installation</li></ul>

UKMS

<ul><li>The "gear-in-gear" principle</li><li>Specially designed connection as well as motor usage option</li><li>Having positive displacement</li><li>The use of different sealing elements</li><li>Possibility to use up to 75,000 SSU viscosity</li></ul>

<ul><li>Pump design that conforms to NFPA 20 standards</li><li>Flexible coupling on the pump motor connection mounted on the chassis</li><li>Different types of engine options (electric / diesel)</li><li>Easy maintenance</li></ul>

YNM NFPA

<ul><li>Conforming to UL 448 and FM 1319 standards</li><li>Flange structure that conforms to ANSI/ASME B16.1 Class 250</li><li>Electric motor that conforms to UL 1004-5 Use of a diesel motor that conforms to UL 1247/ FM 1333</li><li>Use of a control panel that conforms to UL 218 and FM 1321 / FM 1323</li><li>Easy maintenance</li></ul>

YNM ULFM

<ul>
<li>These are single stage, vertical shaft in-line type centrifugal
pumps.</li>
<li>The single suction, closed type impeller is dynamically
balanced against thrust (axial force) by use of balance holes
and back wear rings.</li>
<li>The pump and the motor are connected by means of an
adapter using a special rigid coupling.</li>
<li>Maintenance and repair are easily carried out due to the
feature that the pump can be detached from the plumbing
works with its body remaining connected to the bed.</li>
<li> in accordance w ith the NFPA fire standard the shaft
non-leakage is provided by soft packing seals.</li>
<li>The pump has been especially designed for part
interchangeability thus making spare part acquisition easy
and fast.</li>
</ul>

YPH NFPA

<ul><li>Pump design that conforms to NFPA 20 standards</li><li>Versatile body design</li><li>Low NPSH and high efficiency</li><li>Different types of engine options (electric / diesel)</li><li>Easy maintenance</li></ul>

YPSP NFPA

<ul><li>Conforming to UL 448 and FM 1311 standards</li><li>Flange structure that conforms to ANSI/ASME B16.1 Class 250</li><li>Electric motor that conforms to UL 1004-5 Use of a diesel motor that conforms to UL 1247/ FM 1333</li><li>Use of a control panel that conforms to UL 218 and FM 1321 / FM 1323</li><li>Easy maintenance</li></ul>

YPSP ULFM

Building Technologies

Every commercial building, such as hotels, hospitals, office towers, and airports, as well as domestic buildings, has its own specific needs.
 
At Masdaf, we provide our customers with ideal comfort and reliability through hydrofoils that can be used in many different applications, as well as circulation pumps for central heating and ventilation systems, ensuring high performance.

Explore Masdaf’s Building Technologies sector, offering innovative pump solutions for the construction industry.

Products for Building Technologies

Industrial Technologies

We provide an extensive selection of product options, including single-stage pumps and multistage high-pressure centrifugal pumps designed for the transfer of industrial fluids, such as pressurisation systems, hot and cold-water transfers, chemical processes, etc., to ensure that all industrial processes run smoothly.

Learn how Masdaf’s Industrial Technologies solutions enhance operational efficiency across various industrial applications.

Products for Industrial Technologies

Infrastructure

We contribute to the quality of your business with solutions that boost your efficiency in the transfer of We contribute to the quality of your business with solutions that boost your efficiency in the transfer of sewage, groundwater, and septic tank water and improve your water treatment, water quality, and water availability.

Explore Masdaf’s Infrastructure sector solutions, delivering reliable and efficient pumping systems for large-scale infrastructure projects.

Products for Infrastructure 

Fire Pump Systems

When designing or installing a fire protection system, the goal is to prevent the need for its operation. You aspire for the best outcomes, yet you also ready yourself for the worst. If tragedy strikes, what you need is a reliable fire pump that performs at its peak and is always ready for action. We offer in-line, end-suction, and double-suction fire suppression systems featuring detachable casing, all designed to meet NFPA 20, UL, FM, and EN 12845 standards.

Discover Masdaf’s Fire sector solutions, designed for efficient fire protection and safety in various environments.

Sektörler

Maritime

ASPVSP

CSV

Diesel Engine Fire Pump Controller

DP

Electric Fire Pump Controller

Enduro

Customer service